Home decoration class teaches you to choose sanita

2022-07-22
  • Detail

When choosing, you should first have a sense of supporting. Every part or accessory in the kit should be at the same level. Some parts or accessories are high-grade, and others are low-grade. As a result, money is wasted, and the overall level is still low-grade

1. When choosing, you should first have a sense of supporting. Every part or accessory in the kit should be at the same level. Some parts or accessories are high-grade, and others are low-grade. As a result, money is wasted, and the overall level is still low-grade. For example, the overall grade of famous brand high-grade ceramics with ordinary plastic hardware is not high. High grade wall and floor tiles are paved on the wall and floor, and equipped with squatting toilets and high-level water tanks, so the grade of toilets can't go up. Therefore, consumers must know well before buying and determine the expected grade level

2. Determine the drainage mode and installation size of the toilet. Before buying a toilet, be sure to find out what kind of drainage method the toilet is. And measure the distance between the center of the water outlet and the wall (under drainage mode) or the distance from the ground (after drainage mode), and determine whether the selected toilet is a under drainage or after drainage structure. Only the toilet with the same drainage mode and the appropriate installation size can be installed. The distance between the wall of the toilet outlet and the floor shall be equal to or slightly less than the distance between the wall of the toilet outlet (lower drainage method), and the distance between the toilet outlet and the floor shall be equal to or slightly higher than the height of the toilet outlet (rear drainage method)

3. The modeling style and tone of supporting products must match. There is more than one ceramic piece in the bathroom. Only when the shape and color of several ceramic pieces such as toilet, washbasin, soap box, toilet paper box, mop pool are consistent or close, can they be harmonious and beautiful

4. When selecting ceramic sanitary ware, we should grasp that there are different requirements between visible and non visible. Visible surface refers to the surface that people can easily see after the installation of porcelain parts. The visible quality should be strictly controlled, especially the quality of parts that can be splashed by water when in use is more important, and the invisible surface after installation, that is, the non visible quality, should not be too picky

5. Inspection and judgment of appearance quality: (1) whether there is cracking. Use a thin rod to tap the edge of the porcelain piece carefully to hear whether its sound is clear. When there is a "hoarse" sound, it proves that the porcelain piece has cracks. (2) Deformation size. Place the porcelain on a flat platform and move in all directions to check whether it is stable and symmetrical, whether the mounting surface and the surface edge of the porcelain are flat, and whether the mounting hole is uniform and smooth. (3) Glaze quality. The glaze must be fine and smooth, and the glaze color must be uniform. The quality of the glaze that can be seen, especially when water can splash wet, is particularly important. Drop a few drops of colored liquid on the glaze and wipe it evenly with a cloth. After a few seconds, wipe it dry with a wet cloth. Check the glaze. It is better if there are no dirty spots. The quality of the glaze determines the degree of dirt when the porcelain is used. Porcelain parts also have water absorption, and toilets also have performance requirements such as sewage discharge, water consumption, noise, water sealing function, etc. these properties are generally difficult for consumers to check and judge. Consumers should try to choose products with quality and reputation assurance

苏州男科医院

兰州皮肤病医院

毕节皮肤病医院

Copyright © 2011 JIN SHI